Technical data
Application | Control and on/off application |
---|---|
Sizes - standard | MD450, MD700 |
Sizes - with reinforced springs | MD450v, MD700v |
Design | Diaphragm; single-acting; internal springs, decentrally located |
Actuator movement | rotary |
Rotary angle | 0 to 75° (optimally matched to VETEC rotary plug valves) |
Power supply | Pneumatic |
Control air range | 3 to 6 bar |
Safety function | Reversible without additional components: Spring force closes (FC) / Spring force opens (FO) |
Diaphragm area | 1636 to 3447 cm² |
Torques | 679 to 8247 Nm |
Nominal stroke | 100 to 130 mm |
Permissible ambient temperature | -40 to +80 °C |
Differential pressures for actuator sizing | TY005.069 |
Swing angle limitation (optional) | Externally adjustable mechanical end stops |
Interface to valve | According to DIN EN ISO 5211 or VETEC standard |
Interface for attachments | In accordance with VDI/VDE 3845-1 (EN 15714-3) and VDI/VDE 3847-2 (IPM attachment kit) |
Conformity | EAC |
Mounting kits (attachment kits)
The attachment kit is the link between valve and rotary actuator with an interface according to DIN EN ISO 5211 or VETEC standard and contains the following components:
- Console or bracket → depending on valve series
- Lever kit
- Screws for fastening to the valve
- Screws for mounting the actuator
- Optional mechanical end stops ( rotation angle limitation)
- Position indicator
- Protective cover (cover plate)
Mounting arrangements
For mounting the actuator type MD to the valve, we recommend mounting types B and D.
Mounting types A and C on request!
Exemplary illustration of attachment type B. For other attachment types, see data sheet TY005.008.
FC = Spring closes • FO = Spring opens • FTO = Medium opens (flow from the front, from the seat side) • FTC = Medium closes (flow from the rear)
Accessories
The control valves can be equipped with various accessories: Positioner, solenoid valve, supply pressure regulator, limit switch, volume booster/booster and other attachments.
Mounting of accessories (attachments) to pneumatic rotary actuators is performed according to two standardized mounting methods: