Skip to main navigation Skip to main content

TYPE 62.7 ROTARY PLUG VALVE

SHORT DESIGN · PLUG & PLAY

SMART IN FLOW CONTROL

For process engineering with low industrial requirements

Especially suitable for:

  • Control of clean liquid, gaseous and neutral media
  • Water processing
  • District heating, district cooling

back to overview Rotary Plug Valves →

↓   Sample configurations

↓   Design

→ Documentation/Certificates

Valves type 62.7 close clockwise and have an opening angle of 90°.

 

Technical Data

Version

Face-to-face dimensions
Size
Pressure rating
Type of end connection · Flange
Seat/plug seal
Seat factors
Flow direction
Characteristic
Rangeability
Temperature range
(different designs)
Leakage rate
 
 
 
 
 
Compliance
DIN EN 558 Table 2 R 36
DN 25 to 200
PN 10, 16, 25, 40
DIN EN 1092-1
 
Metal seal · Soft seal
F1 (100 %) · F0,4 (40 %)
Flow to open (FTO)
Equal percentage or linear using a positioner · inherent
Up to 200:1
–10 to +220 °C
 
Metal seal:
IV acc. to DIN EN 60534-4 and ANSI/FCI 70-2

Soft seal:
VI acc. to DIN EN 60534-4 and ANSI/FCI 70-2
ISA 75.08.02
NPS 1 to 8
CL 150, 300
ANSI/ASME B16.5
 
Metal seal · Soft seal
F1 (100 %) · F0,6 (60 %) · F0,4 (40 %) · F0,25 (25 %)
Flow to open (FTO)
Equal percentage or linear using a positioner · inherent
Up to 200:1
–146 to +428 °F
 
Metal seal:
IV acc. to DIN EN 60534-4 and ANSI/FCI 70-2

Soft seal:
VI acc. to DIN EN 60534-4 and ANSI/FCI 70-2

Sample Configuration

The rotary plug valve can be configured with pneumatic, electric or hydraulic actuators and can be equipped with various accessories.

Type 62.7-AT

With pneumatic double piston rotary actuator type AT, single or double acting

Design

Packing

Spring loaded packing with V-rings